-
HY IR TV Box Remote Control
The remote control is used for a long time, and the conductive sheet of the key is dirty, leading to the failure of the key.
The emergency solution is to carefully open the back cover of the remote control, dip a cotton swab with alcohol, wipe the conductive rubber on the plastic key piece and the printing surface of the printing board. Black material will be left on the cotton swab, and then replace the cotton swab and wipe again until there is no more black material. Then reinstall the remote control. -
HY Universal IR Set Top Box Remote Control
The IR set-top box remote control works on the principle of using an infrared transmitter tube to transform a signal into invisible infrared that is then sent out. The remote control object is connected to an infrared receiving head to receive the invisible infrared and then turn it into a signal that can be used to move the object.
-
HY Universal IR Remote Control
How to disassemble the remote control of set-top box:
1. The set-top box remote control has no organ, but the plastic parts are directly stuck. It is easy to damage the shell with a screwdriver.
2. Some remote control and battery box behind the fastening screws, some are not, need to pry open from the gap between the upper and lower;
3. Some remote control behind and battery box have fastening screws, some do not, need to pry open from the gap between the upper and lower;
4 can only be pry, it is surrounded by buckles, the original remote control shell has a certain toughness, generally will not be broken;
5. Open the battery cover, take out the battery, use a thin blade or small screwdriver, along the remote control cover seam slowly pry open
6. Take out the circuit board, wipe it with anhydrous alcohol and cloth, wipe it with dry cloth, and install it step by step in reverse order. -
HY Smart TV Box Remote Control
First of all, we need to confirm whether there is a TV button area on the remote control of the set-top box. If there is, it means that the remote control has the learning function, and the remote control of the TV can be connected and studied. After the connection, you can use the remote control of the set-top box to control the set-top box and the TV at the same time.
General docking methods are as follows:
1. Press and hold the setting button of the set-top box remote control for about 2 seconds, and release the setting button when the red light is long on. At this time, the remote control is in the learning standby state.
2. the TV remote control and the set top box remote control infrared transmitter relative, press the TV remote control [standby key], the set top box remote control indicator will flash, then press the learning area of the set top box remote control [standby key], then the indicator will turn on, indicating that the set top box has completed the standby key learning of the TV remote control;
3. Next, you can install the above method to operate and learn other keys on the TV remote control, such as volume key and channel key.
4. After learning all keys successfully, press the setting key of the set-top box remote control to exit the learning state; 5. Next, the user can use the TV button on the remote control of the set-top box to control the TV. For example, press the standby button to make the TV enter the standby state, and press the volume button to adjust the volume of the TV.
